iPhone 3G - 4.2.1 (Final) Jailbreak | Unlock Tutorial.
Step 1. Launch Redsn0w. [ Windows | Mac ]
Step 2. Connect iPhone and click "Jailbreak"
Step 3. Put the iPhone into DFU.
Step 4. Confirm check box of "Install Cydia" and "Update to iPad baseband" (if unlocking) then click "next".
Step 5. Allow the jailbreak (& update) process to finish and the phone to reboot.
Step 6. (for unlocking users reopen Redsn0w and click "Jailbreak" then check box "Downgrade from iPad baseband" and next. Then allow the downgrade process to finish and reboot.)
Step 7. Launch Cydia.
Step 8. Click "Search" on the bottom right and search for "Ultrasn0w".
Step 9. Install Ultrasn0w and reboot the device.
Step 10. Enjoy!
Thursday, August 9, 2012
Kindle Fire - Root & Custom Recovery [TUT]
Kindle Fire - Root & Custom Recovery Tutorial.
Step 1. Download the Kindle Fire Utility from here.
Step 2. Run install_drivers.bat
Step 3. Plug in your Kindle Fire. Make sure the Kindle is at the main launcher.
Step 4. Run run.bat
Step 5. Check to make sure it says "Online" next to ADB Status
Step 6. Type 2 for "Install Permanent Root with Superuser" and press enter.
Step 7. Let it run.
Step 8. Reboot. (Can reboot into Custom Recovery for installation of Custom ROM)
Step 9. Enjoy
Note: For all Custom ROM's like "Jelly Bean" simply put the rom image onto the SDcard and install from Custom Recovery. Each ROM may have it's own requirements for clearing cache and delvik caches so please read all documentation for your ROM's before you install them.
iPhone 3GS/4, iPod Touch 3G/4, iPad 1/2 & 3 - SiriPort Installation [TUT]
Siriport installation for iPhone 3GS/4, iPod Touch 3G/4 & iPad 1/2/3.
REQUIREMENTS; iPhone/iPod 5.1.1, iPad 5.1/5.1.1 (Suggested 5.1.1 across)
Step 1. Launch Cydia.
Step 2. Click on "Manage" at the bottom right (If in iPad click directly on "Sources").
Step 3. Click "Sources".
Step 4. Click "Edit" at the top right then "Add" on the top left.
Step 5. Enter the following repository URL; http://repo.siriport.ru
Step 6. Click "Add Source" and allow Cydia time to update.
Step 7. Click on the newly updated source. (Normally bottom of the list)
Step 8. For iPod/iPhone install SiriPort (Original), for iPad install SiriPort iPad's (Original).
Step 9. Confirm in Settings < General < Siri that Siri is turned on and reboot the device.
Step 10. Next through setup screen and Use Siri.
Step 11. In Settings < SiriPort click on "Install Certificate" which will launch your Safari Browser then redirect to your Settings app.
Step 12. Install the certificate (Might need to "trust" it) then reboot the device again.
Step 13. Launch SiriPort and continually use Siri by saying "hello" or giving it a command giving it 10 or 15 seconds to respond.
Step 14. After a greeting is received enjoy!
Note: If it has not responded with a greeting within that time just hit the Siri button again to stop it and another time to start again and keep going until she responds.
REQUIREMENTS; iPhone/iPod 5.1.1, iPad 5.1/5.1.1 (Suggested 5.1.1 across)
Step 1. Launch Cydia.
Step 2. Click on "Manage" at the bottom right (If in iPad click directly on "Sources").
Step 3. Click "Sources".
Step 4. Click "Edit" at the top right then "Add" on the top left.
Step 5. Enter the following repository URL; http://repo.siriport.ru
Step 6. Click "Add Source" and allow Cydia time to update.
Step 7. Click on the newly updated source. (Normally bottom of the list)
Step 8. For iPod/iPhone install SiriPort (Original), for iPad install SiriPort iPad's (Original).
Step 9. Confirm in Settings < General < Siri that Siri is turned on and reboot the device.
Step 10. Next through setup screen and Use Siri.
Step 11. In Settings < SiriPort click on "Install Certificate" which will launch your Safari Browser then redirect to your Settings app.
Step 12. Install the certificate (Might need to "trust" it) then reboot the device again.
Step 13. Launch SiriPort and continually use Siri by saying "hello" or giving it a command giving it 10 or 15 seconds to respond.
Step 14. After a greeting is received enjoy!
Note: If it has not responded with a greeting within that time just hit the Siri button again to stop it and another time to start again and keep going until she responds.
iPhone 3G/3GS Baseband Upgrade/Downgrade [TUT]
iPhone 3G/3GS Baseband Upgrade | Downgrade [Tutorial]
REQUIREMENTS 3GS: Model number week 128 or LOWER.
(Upgrade)
Step 1. Put your iPhone 3G or 3GS into DFU mode.
Step 2. Launch Redsn0w. [ Windows | Mac ]
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and firmware check "Update to iPad baseband".
Step 5. If you are prejailbroken and just need the upgrade uncheck "Install Cydia" on new jailbreaks and upgrades leave it checked.
Step 6. Click "next" and allow Redsn0w to complete the process of jailbreak &/or upgrade.
Step 7. Reinstall (or install fresh) Ultrasn0w for unlock. (If downgrading for software unlock revert to downgrade instructions)
Step 8. Enjoy!
(Downgrade)
Step 1. Launch Redsn0w. [ Windows | Mac ]
Step 2. Connect your iPhone in NORMAL mode.
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and baseband check "Downgrade from iPad baseband".
Step 5. Confirm unchecking of "Install Cydia".
Step 6. Click "next" and put the iPhone into DFU mode.
Step 7. Allow Redsn0w to complete the downgrade process.
Step 8. Reinstall (or install fresh) Ultrasn0w for unlock.
Step 9. Enjoy.
REQUIREMENTS 3GS: Model number week 128 or LOWER.
(Upgrade)
Step 1. Put your iPhone 3G or 3GS into DFU mode.
Step 2. Launch Redsn0w. [ Windows | Mac ]
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and firmware check "Update to iPad baseband".
Step 5. If you are prejailbroken and just need the upgrade uncheck "Install Cydia" on new jailbreaks and upgrades leave it checked.
Step 6. Click "next" and allow Redsn0w to complete the process of jailbreak &/or upgrade.
Step 7. Reinstall (or install fresh) Ultrasn0w for unlock. (If downgrading for software unlock revert to downgrade instructions)
Step 8. Enjoy!
(Downgrade)
Step 1. Launch Redsn0w. [ Windows | Mac ]
Step 2. Connect your iPhone in NORMAL mode.
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and baseband check "Downgrade from iPad baseband".
Step 5. Confirm unchecking of "Install Cydia".
Step 6. Click "next" and put the iPhone into DFU mode.
Step 7. Allow Redsn0w to complete the downgrade process.
Step 8. Reinstall (or install fresh) Ultrasn0w for unlock.
Step 9. Enjoy.
Wednesday, August 8, 2012
New Updates (Schedule)
Again we apologize for our absence in getting all the tutorials going and the YouTube channel going but life has been quite hectic. In the next 96 hours (hopefully) there are plans to release guides for the following; 3GS 4.2.1 final firmware jailbreaks and full set ups, Redsn0w's upgrade/downgrade option for the 06.15/05.12 basebands, finalizing and updating the SiriPort guide for iPhone 3Gs/iPod Touch 3G/4G/iPad 1/2/3 and working to name all themes that are incompatible (we find more compatible than incompatible so the list will be easier for the incompatible themes) and last but not least the "Jedi Tweak List" aka the JTL where we will be outlining the most important and necessary tweaks for your iDevices chosen by the Jailbroken Jedi.
Please check out and like the page on facebook @ JailbrokenJedi
Don't forget to follow on twitter @ @JailbrokenJedi
If you have any questions, comments or care to help in any way please use the mailer on the side to contact us.
Please check out and like the page on facebook @ JailbrokenJedi
Don't forget to follow on twitter @ @JailbrokenJedi
If you have any questions, comments or care to help in any way please use the mailer on the side to contact us.
Subscribe to:
Comments (Atom)