iPhone 3G - 4.2.1 (Final) Jailbreak [TUT]

iPhone 3G - 4.2.1 (Final) Jailbreak | Unlock Tutorial.

Step 1. Launch Redsn0w. [ Windows | Mac ]
Step 2. Connect iPhone and click "Jailbreak"
Step 3. Put the iPhone into DFU.
Step 4. Confirm check box of "Install Cydia" and "Update to iPad baseband" (if unlocking) then click "next".
Step 5. Allow the jailbreak (& update) process to finish and the phone to reboot.
Step 6. (for unlocking users reopen Redsn0w and click "Jailbreak" then check box "Downgrade from iPad baseband" and next. Then allow the downgrade process to finish and reboot.)
Step 7. Launch Cydia.
Step 8. Click "Search" on the bottom right and search for "Ultrasn0w".
Step 9. Install Ultrasn0w and reboot the device.
Step 10. Enjoy!

Kindle Fire - Root & Custom Recovery [TUT]

Kindle Fire - Root & Custom Recovery Tutorial.

Step 1. Download the Kindle Fire Utility from here.

Step 2. Run install_drivers.bat

Step 3. Plug in your Kindle Fire. Make sure the Kindle is at the main launcher.

Step 4. Run run.bat

Step 5. Check to make sure it says "Online" next to ADB Status

Step 6. Type 2 for "Install Permanent Root with Superuser" and press enter.

Step 7. Let it run.

Step 8. Reboot. (Can reboot into Custom Recovery for installation of Custom ROM)

Step 9. Enjoy

Note: For all Custom ROM's like "Jelly Bean" simply put the rom image onto the SDcard and install from Custom Recovery. Each ROM may have it's own requirements for clearing cache and delvik caches so please read all documentation for your ROM's before you install them.

iPhone 3GS/4, iPod Touch 3G/4, iPad 1/2 & 3 - SiriPort Installation [TUT]

Siriport installation for iPhone 3GS/4, iPod Touch 3G/4 & iPad 1/2/3.

REQUIREMENTS; iPhone/iPod 5.1.1, iPad 5.1/5.1.1 (Suggested 5.1.1 across)

Step 1. Launch Cydia.
Step 2. Click on "Manage" at the bottom right (If in iPad click directly on "Sources").
Step 3. Click "Sources".
Step 4. Click "Edit" at the top right then "Add" on the top left.
Step 5. Enter the following repository URL; http://repo.siriport.ru
Step 6. Click "Add Source" and allow Cydia time to update.
Step 7. Click on the newly updated source. (Normally bottom of the list)
Step 8. For iPod/iPhone install SiriPort (Original), for iPad install SiriPort iPad's (Original).
Step 9. Confirm in Settings < General < Siri that Siri is turned on and reboot the device.
Step 10. Next through setup screen and Use Siri.
Step 11. In Settings < SiriPort click on "Install Certificate" which will launch your Safari Browser then redirect to your Settings app.
Step 12. Install the certificate (Might need to "trust" it) then reboot the device again.
Step 13. Launch SiriPort and continually use Siri by saying "hello" or giving it a command giving it 10 or 15 seconds to respond.
Step 14. After a greeting is received enjoy!

Note: If it has not responded with a greeting within that time just hit the Siri button again to stop it and another time to start again and keep going until she responds.

iPhone 3G/3GS Baseband Upgrade/Downgrade [TUT]

iPhone 3G/3GS Baseband Upgrade | Downgrade [Tutorial]

REQUIREMENTS 3GS: Model number week 128 or LOWER.

(Upgrade)
Step 1. Put your iPhone 3G or 3GS into DFU mode.
Step 2. Launch Redsn0w. [ Windows | Mac ]
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and firmware check "Update to iPad baseband".
Step 5. If you are prejailbroken and just need the upgrade uncheck "Install Cydia" on new jailbreaks and upgrades leave it checked.
Step 6. Click "next" and allow Redsn0w to complete the process of jailbreak &/or upgrade.
Step 7. Reinstall (or install fresh) Ultrasn0w for unlock. (If downgrading for software unlock revert to downgrade instructions)
Step 8. Enjoy!

(Downgrade)
Step 1. Launch Redsn0w. [ Windows | Mac ]
Step 2. Connect your iPhone in NORMAL mode.
Step 3. Click "Jailbreak".
Step 4. After Redsn0w has identified your iPhone model and baseband check "Downgrade from iPad baseband".
Step 5. Confirm unchecking of "Install Cydia".
Step 6. Click "next" and put the iPhone into DFU mode.
Step 7. Allow Redsn0w to complete the downgrade process.
Step 8. Reinstall (or install fresh) Ultrasn0w for unlock.
Step 9. Enjoy.

New Updates (Schedule)

Again we apologize for our absence in getting all the tutorials going and the YouTube channel going but life has been quite hectic. In the next 96 hours (hopefully) there are plans to release guides for the following; 3GS 4.2.1 final firmware jailbreaks and full set ups, Redsn0w's upgrade/downgrade option for the 06.15/05.12 basebands, finalizing and updating the SiriPort guide for iPhone 3Gs/iPod Touch 3G/4G/iPad 1/2/3 and working to name all themes that are incompatible (we find more compatible than incompatible so the list will be easier for the incompatible themes) and last but not least the "Jedi Tweak List" aka the JTL where we will be outlining the most important and necessary tweaks for your iDevices chosen by the Jailbroken Jedi.

Please check out and like the page on facebook @ JailbrokenJedi
Don't forget to follow on twitter @ @JailbrokenJedi

If you have any questions, comments or care to help in any way please use the mailer on the side to contact us.

iPhone 2G - 3.1.2 Jailbreak/Unlock [TUT]

1. Restore iPhone 2G to 3.1.2.
2. Download the 3.9/4.6 bootloaders
3. Launch Redsn0w 0.9 - Win | Redsn0w 0.9 - Mac
4. Click "browse" and select the 3.1.2 firmware downloaded earlier.
5. Click "next" and check the box for "Install Cydia".
6. If unlocking then check the box marked "Unlock". Then click "next" and select the 3.9/4.6 bootloader files downloaded earlier.
7. Make sure the device is connected and either powered off or in DFU mode then click "next".
8. If you are not in DFU then Redsn0w will guide you through the process, if in or once in DFU Redsn0w will not only exploit and load the jailbreak it will also flash the bootloader and "boot neuter" the device.
9. Once fully rebooted launch Cydia and allow any and all files to update.
10. Install "Ultrasn0w" and reboot the device.
11. Launch Cydia, click on "Manage" at the bottom then "Edit" and "Add".
12. Add the following source "http://cydia.ifoneguide.nl" and allow the sources to update.
13. Install "Native MMS" and reboot the device.
14. Open Settings and go to General then Network then Cellular Data Network and make sure all your APN settings are correct not only for Data but for MMS as well.
15. Reboot the device one last time and send a MMS and ENJOY!

Updates

We as staff would like to apologize for our lack of activity over the last week or two. With a ton of new things in the works we have been focusing our time into getting things ready but not released for not only this site but across the board on our developments.

We will be working throughout the rest of the day to try and release a few more tutorials and bring up our past work to make everything current.

Main releases we will be focusing on will be the following (old model final versions);

iPhone 2G - 3.1.2/3.1.3 (MMS, unlocks and finalization)

iPhone 3G - 4.2.1 (Full setup, unlocks and finalization)

(Current model versions and old versions)

Jailbreaks/Unlocks from 3.1.3 - 5.1.1 (including 01.59 support for iPhone 4 and Gevey SIM support)

We will also be releasing an all inclusive guide for all iPhone 3GS, iPhone 4 and iPhone 4S users that use said devices on alternative networks(unlocked). This guide will explain in full how to use SAM to be able to activate, register and use iMessage and Facetime for non AT&T activated devices. It will also include the Gevey sim +11 exploit for iMessage and Facetime activation for you T-Mobile users, seeing as SAM is not the only problem when using the Gevey SIM interpreter.

Please bare with us as we try to get everything coordinated and released.

Feel free to contact us by email if you have any questions, comments or need any sort of support for any PC/Mac, iDevice or Android OS devices. We can be reached at the following email jailbrokenjedi@gmail.com Please subject line the email "Support request" or "Questions", all others will be ignored as spam.

iOS 5.1.1 Jailbreak Tutorial [TUT]

iDevice (3GS, 4, 4s) 5.1.1 - Jailbreak tutorial (brought to you by Jailbroken Jedi)


(For already activated iDevices on 5.1.1 use the following steps)
1. Launch Absinthe. (Windows | Mac | Linux)
2. Connect iDevice.
3. Click Jailbreak.
4. Enjoy!

(For those needing hacktivation use the following steps)
1. Connect iDevice to computer.
2. Launch Redsn0w. (Windows | Mac)
3. Click Jailbreak.
4. Follow DFU instructions on redsn0w.
5. Allow Redsn0w to jailbreak iDevice. (Hacktivate iPhone)
6. Click back on Redsn0w then click extras.
7. Click boot tethered.
8. Follow DFU instructions on Redsn0w.
9. Let iDevice boot tethered.
10. Launch Cydia, allow update and install "Rocky Racoon Untether".
11. Enjoy!

(For hacktivated iPhones follow the steps to activate with SAM)
1. In Cydia click manage > sources > edit > add
2. Add "http://repo.bingner.com"
3. Install SAM.
4. Open SAM and turn "Hacktivate" OFF.
5. Click on Utilities then Deactivate & Clear Push.
6. Connect iPhone to iTunes and allow iTunes to activate with non AT&T sim.
7. Enjoy!

(For those that wish to use Sn0wbreeze to cook your firmware use the following steps)
1. Launch Sn0wbreeze. (Windows)
2. Follow the prompts.
3. Cook firmware.
4. Use Sn0wbreeze (via iReb) to enter pwned DFU (you can use iReb if necessary Windows).
5. Open iTunes.
6. Shift + click (Apple + click for mac) restore and choose cooked firmware.
7. Allow restore of firmware
8. Enjoy!

So after an hour of messing with settings and feeds Twitter and Facebook are now 100% posting.

Current project: Links for Redsn0w, Sn0wbreeze & Absinthe. Also currently creating a all in one tutorial for 5.1.1 jailbreaks for those requiring Hacktivation and those that do not. (Hactivation method will include information for SAM).

Thank you for your patience.

- Staff

Blogspot should officially post not only to Facebook but as well as Twitter. If anything is not working we should have that resolved later this afternoon.

Next update: Linking current Redsn0w, Sn0wbreeze & Absinthe versions for current 5.1.1 Jailbreaks. (might even link a tutorial if I get to lazy to write one lol)

Thanks for sticking with us while we bring everything online properly.

- Staff

Blogspot is up and running!

Just got the blogspot designed, working on getting everything linked to the Twitter and the Facebook.

Don't forget to like the Facebook page @ Facebook.com/JailbrokenJedi and follow on Twitter @ Twitter.com/JailbrokenJedi